Stolthaven boiler

Stolthaven Dagenham Ltd

Babcock Wanson has designed a new thermal fluid system to accommodate its high efficiency Thermal Fluid Heaters at Stolthaven Dagenham Ltd bulk liquid terminal situated on the river Thames in Dagenham, Essex.

liquid terminal thermal fluid system

Installing High Efficiency Thermal Fluid Heaters

The site has been operating for many years, handling chemicals, petroleum, pharmaceutical and agricultural products, but more recently has added a bitumen facility to its portfolio. Originally operating at 134,000 M³, Stolthaven Dagenham has now expanded its capacity to 160,000 M³ and is home to 120 tanks ranging from 66 to 11,000 M³.

Babcock Wanson worked closely with Stolthaven Dagenham’s consultants to provide the final design of the boiler house and then install and fit it out with its EPC ES and TPC B Thermal Fluid Heaters. A large proportion of the thermal design was also carried out by Babcock Wanson with the supply of all the system valves and ancillary equipment to provide a complete system with single point of responsibility. The system also incorporates a secondary circuit to provide lower temperature thermal fluid for the bitumen pump casing heating. The project was a fast moving one with tight deadlines, all of which Babcock Wanson met.

The Solution

The Babcock Wanson EPC1000ES and TPC1000B Thermal Fluid Heaters are being used at the site to heat the bitumen to a constant 165°C to maintain its fluid state. If the bitumen falls below this temperature it becomes difficult – and eventually impossible - to pump it where it needs to go. An accurate and reliable heat source is therefore essential. The heaters are fitted with dual fuel burners to guarantee fuel supplies with gasoil as backup if natural gas is not available. These are ideal for interruptible site gas supplies as they reduce operational costs whilst ensuring operational availability of the heating equipment.

The Babcock Wanson EPC ES and TPC B are fully automatic coil type, multi-pass Thermal Fluid Heaters and were chosen for this application as they offer a high efficiency solution to a very energy intensive process. They provide optimal distribution of the heat, high fluid velocity in the exchange tubes and continuous flow monitoring to ensure long fluid life and the highest level of safety. The EPC Heaters also precisely match fuel input to plant energy requirements and include their own in-built exhaust gas to combustion air economiser for highest practicable operating efficiency. With lower energy input demand also comes lower total exhaust emissions, so there are also environmental benefits.

liquid terminal thermal fluid system

Zeznania klientów

Sam Robinson, Plant Engineering & Maintenance Manager, Gurit Composite Components

Nagrzewnice są dobrze skonstruowane, łatwe w obsłudze i dobrze się spisują. Jedno nasze urządzenie pracuje przez około 24/7 360 dni w roku i wystąpiła tylko jedna awaria w ciągu ośmiu lat. Sterowanie nagrzewnicą jest bardzo proste, bez zbędnych, skomplikowanych programów do obsługi, zaprojektowane są tak, aby wykonywać to co jest wymagane i działa bardzo dobrze.

Andrew Taylor, dyrektor, Freedom Brewery

Wybraliśmy olej termalny, ponieważ był tańszy w instalacji i eksploatacji, wymaga mniej miejsca na montaż niż para i jest bardziej przyjazny środowisku.

Duncan McLeod, inżynier, Total Bitumen Preston

Kluczowe korzyści, które już zostały osiągnięte dzięki kotłom EPC, obejmują zmniejszenie kosztów paliwa, emisji spalin, większą wydajność i przede wszystkim zamiana na paliwa ciężkiego na gaz ziemny, co wyeliminowało potrzebę składowania paliwa na miejscu.

Jeff Farey, kierownik ds. konserwacji, Beardow Adams

Nagrzewnice Babcock Wanson okazały się niezawodne w całej naszej firmie, która zawsze zapewniała zapewniała dobry serwis.

David Drewry, dyrektor techniczny AIM Composites

Nie wpółpracowaliśmy wcześniej z firmą Babcock Wanson , ale uważam, że świadczone usługi są na bardzo wysokim poziomie.

Nicola Lord, kierownik fabryki, Blackburn Chemicals

Stwierdziliśmy, że urządzenia Babcock Wanson są wydajne i niezawodne, zawsze gdy potrzebujemy, otrzymujemy od nich wsparcie serwisowe.

Keith Netting, menedżer ds. rozwoju i industrializacji produktów, Gurit Composite Components

Nagrzewnice są dobrze skonstruowane, łatwe w obsłudze i dobrze się spisują. Jedno nasze urządzenie pracuje przez około 24/7 360 dni w roku i wystąpiła tylko jedna awaria w ciągu ośmiu lat. Sterowanie nagrzewnicą jest bardzo proste, bez zbędnych, skomplikowanych programów do obsługi, zaprojektowane są tak, aby wykonywać to co jest wymagane i działa bardzo dobrze.

Allan Goulden, dyrektor techniczny Eco-Oil

Obniżenie kosztów energii było kluczem do podjęcia naszej decyzji. Wiedzieliśmy, że możemy osiągnąć znaczne oszczędności, przechodząc z pary na olej termalny jako źródła ciepła dla naszego procesu. Dokładnie zbadaliśmy te opcje i stwierdzilismy, że Babcock Wanson oferuje najlepsze rozwiązanie. Do tej pory udowodniliśmy, że mamy rację: system zmniejszył nasze koszty energii i jest łatwy w użyciu.

Douglas Watt, Starszy Inżynier Procesu, Eastham Refinery Ltd.

Nagrzewnice spełniły nasze oczekiwania i są proste w obsłudze. Zaowocowało to znacznym obniżeniem kosztów paliwa w stosunku do naszych poprzednich nagrzewnic olejowych.

Peter Shrimpton, kierownik projektów inżynieryjnych w Bridgnorth Aluminium Ltd.

Nie znaliśmy Babcocka ale nie mieliśmy z nim żadnych problemów; po prostu go włączasz i działa - po prostu! Usługa serwisu, którą otrzymaliśmy od Babcocka Wansona była również świetna.

Proszę o kontakt…

Wszystkie etapy doboru urządzeń i usług są ściśle zorientowane na potrzeby naszych klientów.

Bakkavor Foods

What the Client Thought

Denis Kelly, Engineering & Construction Manager at Stolthaven Dagenham, comments on the decision to use Babcock Wanson for this latest project: “we looked at the market and what was available to suit our needs. We were familiar with Babcock Wanson and I have seen their equipment previously when working at other similar sites. It’s a good, well known brand with competitively priced products and with a UK base which was important for ongoing support.

“The Thermal Fluid Heaters themselves were ideal for this project as they are based on mature technology and are well proven in the field. They are robust and also require very little maintenance.”

Stolthaven Dagenham is one of many bulk liquid storage and logistics companies that Babcock Wanson has worked with over recent years. The company has gained an excellent reputation in the industry for its reliable, cost-effective heaters and excellent service.