Webster-Horsfall boiler

Webster & Horsfall

One of the UK’s leading manufacturers of Wire and Strip, Webster & Horsfall, has recently converted from steam to thermal fluid heating for maximum energy savings with the help of industrial process heating specialist Babcock Wanson UK.

thermal-fluid-heating

Carbon Reduction and Improved Efficiency

Webster & Horsfall, which created the wire for the first communication cable laid across the Atlantic Ocean in 1865, has invested an initial £1 million in new production line plant and equipment in its Birmingham premises to manufacture high-strength drawn wire. Part of a larger investment to develop the overall site, the work is being undertaken to reduce costs and carbon footprint and improve efficiency through modernising machinery and infrastructure.

A key element to the carbon reduction initiative and improved efficiency has come from Webster & Horsfall’s investment in a Babcock Wanson TPC600B thermal fluid heating system. Following a survey conducted by The Carbon Trust to identify areas where efficiency could be improved, replacing the existing inefficient steam boiler was identified as key. Webster & Horsfall selected Babcock Wanson for the task as it’s a long established company with a good reputation and a thorough understanding of the Carbon Trust requirements for the interest free loan for the new Thermal Fluid Heater.

The Solution

The TPC600B - a fully automatic coil type, multi-pass thermal fluid heater complete with integrated burner, control system and safety devices - was recommended by Babcock Wanson for the plant and has been installed in the process area. It is being used for heating tanks for metal treatment.

The new system precisely matches fuel input to plant energy requirements for high efficiency. In fact, thermal fluid heating systems can use 20-50% less energy to transfer the same amount of heat when compared to traditional steam heating systems. With a large energy user such as Webster & Horsfall, such a difference makes for considerable savings, both financially and environmentally.

The TPC600B can utilise a wide range of heat transfer fluids and, for this application, a mid-range thermal oil was selected which gives Webster & Horsfall a reasonable initial capital cost and long fluid life expectancy. The existing tank heating system was modified with Babcock Wanson’s help to ensure the best results were achieved.

thermal-fluid-heating
thermal-fluid-heating

What Webster & Horsfall Say

Robert Horsfall, Finance Director of family owned Webster & Horsfall, is understandably pleased with the savings made with the new system as well as its ease of operation: “The new heater is one third more efficient than our previous steam based boiler, which allows us to operate more efficiently, reduce our energy bills and have a considerable impact on reducing our Carbon footprint.

“What we hadn’t expected initially though is the level of control the new system provides us with; it’s amazing. It alerts us to any potential issues, is easy to maintain (no annual statutory inspection is required) and is quick to respond. All that and it doesn’t take up much room.”

In addition to the TPC600B, Babcock Wanson offers a complete range of products and services for boiler houses and other process heating needs, from steam boilers, thermal fluid heaters, rapid steam generators and hot water boilers to VOC and odour treatment by thermal oxidation, water treatment or process air heating solutions. The company aims to help optimise customer’s energy production with high quality products and efficient service.

Zeznania klientów

Sam Robinson, Plant Engineering & Maintenance Manager, Gurit Composite Components

Nagrzewnice są dobrze skonstruowane, łatwe w obsłudze i dobrze się spisują. Jedno nasze urządzenie pracuje przez około 24/7 360 dni w roku i wystąpiła tylko jedna awaria w ciągu ośmiu lat. Sterowanie nagrzewnicą jest bardzo proste, bez zbędnych, skomplikowanych programów do obsługi, zaprojektowane są tak, aby wykonywać to co jest wymagane i działa bardzo dobrze.

Andrew Taylor, dyrektor, Freedom Brewery

Wybraliśmy olej termalny, ponieważ był tańszy w instalacji i eksploatacji, wymaga mniej miejsca na montaż niż para i jest bardziej przyjazny środowisku.

Duncan McLeod, inżynier, Total Bitumen Preston

Kluczowe korzyści, które już zostały osiągnięte dzięki kotłom EPC, obejmują zmniejszenie kosztów paliwa, emisji spalin, większą wydajność i przede wszystkim zamiana na paliwa ciężkiego na gaz ziemny, co wyeliminowało potrzebę składowania paliwa na miejscu.

Jeff Farey, kierownik ds. konserwacji, Beardow Adams

Nagrzewnice Babcock Wanson okazały się niezawodne w całej naszej firmie, która zawsze zapewniała zapewniała dobry serwis.

David Drewry, dyrektor techniczny AIM Composites

Nie wpółpracowaliśmy wcześniej z firmą Babcock Wanson , ale uważam, że świadczone usługi są na bardzo wysokim poziomie.

Nicola Lord, kierownik fabryki, Blackburn Chemicals

Stwierdziliśmy, że urządzenia Babcock Wanson są wydajne i niezawodne, zawsze gdy potrzebujemy, otrzymujemy od nich wsparcie serwisowe.

Keith Netting, menedżer ds. rozwoju i industrializacji produktów, Gurit Composite Components

Nagrzewnice są dobrze skonstruowane, łatwe w obsłudze i dobrze się spisują. Jedno nasze urządzenie pracuje przez około 24/7 360 dni w roku i wystąpiła tylko jedna awaria w ciągu ośmiu lat. Sterowanie nagrzewnicą jest bardzo proste, bez zbędnych, skomplikowanych programów do obsługi, zaprojektowane są tak, aby wykonywać to co jest wymagane i działa bardzo dobrze.

Allan Goulden, dyrektor techniczny Eco-Oil

Obniżenie kosztów energii było kluczem do podjęcia naszej decyzji. Wiedzieliśmy, że możemy osiągnąć znaczne oszczędności, przechodząc z pary na olej termalny jako źródła ciepła dla naszego procesu. Dokładnie zbadaliśmy te opcje i stwierdzilismy, że Babcock Wanson oferuje najlepsze rozwiązanie. Do tej pory udowodniliśmy, że mamy rację: system zmniejszył nasze koszty energii i jest łatwy w użyciu.

Douglas Watt, Starszy Inżynier Procesu, Eastham Refinery Ltd.

Nagrzewnice spełniły nasze oczekiwania i są proste w obsłudze. Zaowocowało to znacznym obniżeniem kosztów paliwa w stosunku do naszych poprzednich nagrzewnic olejowych.

Peter Shrimpton, kierownik projektów inżynieryjnych w Bridgnorth Aluminium Ltd.

Nie znaliśmy Babcocka ale nie mieliśmy z nim żadnych problemów; po prostu go włączasz i działa - po prostu! Usługa serwisu, którą otrzymaliśmy od Babcocka Wansona była również świetna.

Proszę o kontakt…

Wszystkie etapy doboru urządzeń i usług są ściśle zorientowane na potrzeby naszych klientów.